Efficiently clone your disks and partitions with DiskCopy, ensuring secure and reliable data transfer

Today, I will tell you about an incredibly cool software called DiskCopy. If you’re a good geek like me, you’ll love it.

DiskCopy is an excellent disk/partition cloning tool, ideal for migrating your data to faster storage or simply for data backup.

Disk Cloning Software for Windows It has some really cool features like:

  • The ability to switch from MBR to GPT and from GPT to MBR. You can choose the partition style of the target disk, and it does not need to be the same as the source disk.
  • Always bootable since the target disk can be made bootable even if the source disk fails.
  • Partition selection: Copy only the partitions you select.
  • Single Partition Cloning: Directly clone one partition into another, and you can make it bootable.
  • Comprehensive Disk/Partition Management Options: DiskCopy has a “Utilities” tab with disk/partition management options.

Note that the tool is still in the beta phase, so back up your data carefully before any dangerous manipulation.

To discover more, click here!

Tutorial content index:

  • Copy a disk
  • Copy a partition
  • Copy progress
  • The Utilities tab
  • Disk utilities
  • Partition utilities

 

Copy a disk

To copy a disk, select the desired source disk in the top left list (see picture above). This list details the storage devices to help you identify the desired disk.

Once you select a disk, the corresponding partition information is displayed in the top right list. This may also help you confirm that the selected disk is really the one you want to copy. If you do not want to copy all the partitions, uncheck the ones you want to skip

Then select the desired target disk in the bottom left list and, optionally, the desired partition style (GPT or MBR). DiskCopy will use the same style as the source disk if you do not change the partition style.

At this point, you can set the desired partition layout for the target disk. Select one of the target partitions in the bottom right list and use the sliders to change the selected partition’s offset and size. You can also enter the desired values in the text input boxes to the right of the sliders, but remember that the partitions can not be smaller than the size of the data to copy. If you don’t want to change the partition layout, leave these controls untouched.

If you want to copy all the data, including System restore points, which are located in the System Volume Information folder, uncheck Do not copy system restore points.

If you make a mistake or want to select a different source disk, just press the Start over button.

When you’re all set, press Start disk copy, and then confirm by pressing Yes.

Copy a partition

  Switch to the Partition copy tab if you just want to copy the data from one partition into another.

This feature is quite straightforward. Just select the source partition in the left list and then the target partition in the right list

Partition copy

Then, if you want to delete all the data in the target drive before starting the copy operation, tick the corresponding checkbox near the bottom.

If the target partition lies in an MBR disk, you can also make it bootable by ticking the Make the destination partition bootable checkbox.

If you want to copy all the data, including System restore points, which are located in the System Volume Information folder, uncheck Do not copy system restore points.

Press the Reload the lists button whenever you want DiskCopy to re-create the partition list, such as when you add a new disk to your system.

Copy progress

While DiskCopy is copying a disk or partition, it displays a dialog box telling you the progress details of the whole operation. This includes a list showing all the actions taken so far and their corresponding results.

Copy progress

Below that list, the dialog box shows the current partition copy percent (while copying data) and also the estimated time remaining.

At the bottom of the dialog box, you see two interactive elements:

Tick Shutdown after copying if you want the system to shut down once the copy operation completes.

Press the Cancel button whenever you want to cancel the whole copy operation.

The Utilities tab

DiskCopy’s Utilities tab provides you with a large set of tools for disk, partition, and volume management.

DiskCopy Utilities tab

Start by selecting the desired disk in the top left pane’s list.

If you are looking for a disk-related utility, then click on the top right pane button corresponding to the desired option.

If you are looking for a partition-related feature, select the desired partition or unallocated space extent on the bottom left list and then click on one of the available partition utilities.

Disk utilities

Currently, the following disk utilities are available:

Erase/Initialize disk

Erase/Initialize disk

Tick Zero out the entire disk if you want to securely prevent recovering any data from this disk. This may take long to complete.

If you do not want to initialize the disk, untick it. Also, initialize the disk as; otherwise, select the desired partition style to initialize the disk with (GPT or MBR).

To start erasing and initializing the disk, press Erase disk and confirm.

Convert to MBR or Convert to GPT

This option lets you convert the partition style of an already initialized disk. You will be prompted to confirm the operation.

Advanced disk options

Advanced Disk Options

This feature lets you easily bring the selected disk online or offline and also make it read-only or read: write. An offline disk can not be accessed, and a read-only disk can not be written to (you can not create or change files).

Some applications use the disk GUID to identify it, so this feature lets you change it. Just make the desired changes to the controls and then press Apply changes and confirm.

Partition utilities

Currently, the following partition utilities are available:

Delete partition

Click this button if you want to delete the selected partition. Note that after deleting a partition, you can no longer access the data in it.

Create partition

Create partition

This option is only available if you select an extent of unallocated space in the partition list. By default, DiskCopy will use the whole size of the extent. If you need a custom size or offset, use the controls at the top to set the desired values.

The default partition type is Basic data if the disk is GPT, or IFS for NTFS or ExFAT if the disk is MBR. This is the equivalent to ‘PRIMARY’ on disk part commands. If you need a different partition type, just select the desired one from the dropdown list.

If you want to automatically format the created partition and give it a label and a drive letter, tick Format the partition with the file system, and then select the desired file system, enter the desired label, and select the desired drive letter. You can also enable large FRS, mark the partition hidden, and mark it active (on MBR disks).

Once you set everything as desired, press Create Now, and DiskCopy will then create your new partition.

Format a partition

Format a partition

This feature lets you easily format the selected partition. The default file system is NTFS. Select a different one from the dropdown box if desired. Optionally enter the desired drive label.

If you want to assign a drive letter to the formatted volume, tick Assign the following drive letter, and optionally select the desired letter from the dropdown box. If desired, tick Use large FRS.

If you want to irrecoverably erase the data in the drive, tick Full (slower). Now you can press Format now and confirm to begin the formatting process.

Resize a partition

This feature lets you easily resize a partition. Indicate the desired new size using the controls at the top, and then press Resize now. Note that resizing may fail if files can not be moved. If that is the case, select a bigger size and try again.

Set label, drive letter, and paths

Set label, drive letter and paths

This feature is very simple. To change the volume’s label, just enter the desired new one in the top text field and press the Apply button to the right.

To set a new drive letter for the selected partition, select the desired letter from the dropdown box and press the Apply button to the right. If you want to remove the current drive letter assigned to the partition, press Remove current drive letter.

The list at the bottom left of this dialog box shows the access paths currently assigned to this partition.

Press Browse selected path to open the selected path in the Windows file explorer.

Press Copy selected access path to copy the selected path to the clipboard.

Press Remove the selected access path to dissociate the access path from the volume.

Press Add new access path to associate a new access path to the volume. You will need to select an empty folder on an NTFS volume.

Advanced options

Advanced partition options

This feature lets you set several partition/volume-related options in just a few clicks. Remember that after selecting the desired settings, you need to press Apply changes for them to become effective.

Set the desired online status by selecting either Online or Offline.
Set the desired access mode by selecting either Read/Write or Read-only.
Tick This partition does not automatically receive a drive letter if that is what you want.
For MBR disks, you can make the selected partition active for boot by ticking This partition is active.
If you want this partition not to appear in the Windows file explorer, tick This partition is hidden.
Enable or disable Automatic data integrity repair on the selected volume by ticking or unticking Enable volume scrub.

Once you made all the changes you want, press Apply Changes and confirm.

Scan and repair

Repair a volume with DiskCopy

This feature lets you easily run CHKDSK on a volume, even if it does not have an associated drive letter or mounting point. A drive letter is automatically assigned for the duration of the scan if needed.

The text controls at the top indicate the volume path and the current health status. Select the desired scan options and, optionally, the advanced options. The CHKDSK command will be executed in the text field at the bottom. You can manually change the command’s parameters if you wish.

Once you set up your scan options, press “Repair Now” and confirm.

Optimize

This feature lets you easily optimize a volume, even if it does not have an associated drive letter or mounting point. Obviously, only formatted volumes can be optimized. NTFS volumes on SSD disks are trimmed, while other volumes are defragged.

When you press the Optimize button, you are prompted to confirm you want to optimize this volume.

Make partition bootable

This exclusive DiskCopy feature lets you repair the boot on disks that became un-bootable. It works for both GPT and MBR disks. Select the correct partition you want to boot into, which contains the Windows folder.

When you press Make partition bootable, you are prompted to confirm the operation.

Partition information

Partition information

This feature displays a list with partition and volume information; the information contained in the list can be exported to a text file in the location you want by pressing Export to text file

End. Thanks

Mohamed SAKHRI
Mohamed SAKHRI

I'm the creator and editor-in-chief of Tech To Geek. Through this little blog, I share with you my passion for technology. I specialize in various operating systems such as Windows, Linux, macOS, and Android, focusing on providing practical and valuable guides.

Articles: 1747

Newsletter Updates

Enter your email address below and subscribe to our newsletter

Leave a Reply

Your email address will not be published. Required fields are marked *